An easy way to remove sticker marks on your car

On many cars, you can find stickers placed on the glass or body elements. Some drivers have not yet managed to remove the "Spikes" sign, and others are trying to stand out in the traffic due to the application. However, over time, the sticker gets old or comes into disuse it is useless, so it has to be removed. The glue that was used to attach the sticker to the body can leave traces behind. It is not easy to remove them with ordinary water, often even a high-pressure washer does not help. That's why I decided to tell you about the method that is available each.

Will the article be useful? Don't forget to put "thumbs up" and subscribe to the channel!

If you want to remove a sticker from a body element, you should be careful and careful. Long the location of the sticker on the paintwork can lead to the fact that a trace of it will remain not only from the glue, but also from uneven paint burnout. In this case, it is better to think about how to replace the sticker, because the trace will be visible even from a few meters.

Most often drivers use alcohols or solvents to remove sticker marks. But this approach still requires some effort and expectation. In addition, the solvent that gets to the places of non-breeding color can damage the paintwork. This is especially true in cases where the driver touched up the chips themselves. pencils. They are immediately washed away even under the influence of a normal solvent.

One of the car enthusiasts I know shared with me a simple and proven way to remove sticker marks from both the glass and the body. To do this, we will need the well-known WD-40 tool, which many people have drivers'. It should be applied to the remaining stickers and dirt and wait for 2-3 minutes. After that, we take a soft material, preferably microfiber, and erase the traces of glue.

If the sticker has a very stable adhesive or has been on the surface for a long time, then the procedure can be repeated. When if necessary, the surface should be heated with a hair dryer, but without much enthusiasm. This will greatly simplify the separation of the adhesive from glass or metal, so that damage can be avoided during subsequent mechanical exposure.

Send a comment